Skip to main content

Shop By Category

Copyright © 2020 Caravan Parts.
ABN: 42 109 003 625

 

Australian Support

 

Guaranteed

Best Deal


The new line of WaterMark certified Suburban water heaters are the same great product you know and trust. Their high recovery gas and gas electric models come in sizes and with the features to match the requirements of almost any RV! Compliant with all required regulations, the new range of Suburban Water Heaters carry the following approvals. WaterMark Certification, Regulatory Compliance Mark and Australia and New Zealand Gas Safety Certification.

The Suburban range of RV water heaters are the best on the road today! Their high recovery gas and electric models come in sizes and with features to match the requirements of almost any RV. Its high tensile steel tanks are porcelain lined and pressure tested twice during the manufacture process insuring tank integrity and reliability. Automatic models in the Suburban range feature direct spark ignition with a remote switch that electronically controls the water heater from inside your RV - a simple convenience especially in poor weather conditions.

Other features include:

Longer Life: Heated water attacks all metals, but not porcelain. That’s why Suburban uses a porcelain-lined, steel water heater tank with an anode rod to “absorb” the electrolytic action - just like your water heater at home.

Faster Recovery: Fast recovery means more hot water and fewer cool water cycles. Suburban uses a copolymer insulation jacket specially moulded to fit the tank which does a better job of retaining heat than some other models.

More Convenience: All Suburban water heaters are designed for easy installation, operation and maintenance. The limit switch, reset button and on/off electric element rocker switch are conveniently located in a housing behind the removable outer door. The electric heat element and combination drain plug/anode rod are also located there.

This Suburban operates on LPG gas only and has a 12V ignitor (inside the van).

Specifications:

  • Capacity: 22.6Lt
  • Max working pressure: 1050Kpa
  • Hourly gas consumption: 10.5mj/hour
  • Test point pressure: 2.63Kpa
  • Jet orifice size: 0.89mm
  • Type of heating medium: Propane Gas
  • Recovery: 40Lt/hr 45ºC rise

Electrical:

  • For automatic gas ignitor: 12Volt DC

Dimensions:

  • W x D x H - 320mm x 500mm x 320mm
  • Includes service door

All Suburban RV hot water systems have an anode rod which absorbs all the corrosive action of hot water, be aware that some imitation anode rods can cause damage to your Suburban HWS. When it comes time to change your anode use a genuine Suburban anode rod that contains the correct length & thread ( 3/4" NPT) to avoid any damage.
 

​PLEASE NOTE - All gas installations in Australia must be performed by a licensed gas fitter.  

(CRV-950-00024)

Be The First To Review This Product!

Help other Caravan Parts users shop smarter by writing reviews for products you have purchased.

Write a product review

 

Australian Support

 

Guaranteed

Best Deal